|
Ground
Stabilisation Mesh
This
stabilisation mesh is used as a cost effective solution to
overcome problems encountered with muddy water logged paths
and gateways. When covered with a layer of stone, the high
strength polymer gridlocks the stone into position, restraining
the lateral movement of the stone.
It is
an extruded HDPE geo-net and is ideal for the prevention of
impassable, deep muddied areas made by vehicles on soil /
grass tracks and farm gateways.
The ground
stabilisation mesh filaments interlock with the top layer
of soil or stone, improving surface stability. It can be used
in the construction of small roads to prevent surface deformation
caused by penetration of the granular sub-base into the soft
sub-grade.
Applications
Include
* Road
embankments & slopes
* Farm gateways
* Grass & soil tracks
* Grassed/soil areas being used by heavy farm machinery
Installation
The surface
should be leveled and any deep ruts filled with crushed stone.
The Ground Stabilisation Mesh can then be rolled out over
the prepared site and covered evenly with the required depth
of stone. (Type 1 Road Stone - approx. 250mm minimum). The
depth of stone will depend on the ground conditions and the
purpose for which the access or track is required. The protected
area can then be used immediately and over a period of time
will compact even more, resulting in a permanent access route.
Note:
In severely muddy situations it is advisable to install an
effective drainage system.
Ground
Stabilisation Mesh is available in green and black, and in
varying mesh sizes and weights. For example:
|
